Article by Jeff Beck, Sam Winebaum, Hope Wilkes, Dave Ames, and Shannon Payne
Saucony Triumph ISO 5 ($160)
Introduction
The Saucony Triumph ISO 5 is a premium daily neutral trainer featuring a full Everun TPU midsole and an ISOFit upper.
This update ups the comfort and cushion game with 2mm more Everun underfoot, a very soft and roomy new Jacquard mesh ISOFit upper, and a redesigned TriFlex outsole of mostly Crystal Rubber. The last is the new broader forefoot grippier heel flavor first found in the Ride ISO. The result is a softer very forgiving shoe top to bottom with a truly commodious upper and which despite its considerable weight is also easier to transition, even at slow paces, and easier on the legs than its predecessor and other plush heavy weights. The ISO 5 maxes out comfort, and yes weight at well over 11 ounces, but can still move along.
Article by Sam Winebaum
I prefer run pants to tights for winter running. With a background in Nordic skiing, I have always felt the classic nordic ski pant, with its windproof front, very breathable back and looser fit than tights kept me warmer, cooler, and less bound up. All the selections below are run pants, two from primarily run brands (Nike and ON) and two from brands with origins in nordic skiing (Dahlie and Craft). All are superb with differing ideal temperature ranges and uses. I typically wear a size medium, have a 32"/ 83 cm waist and am 5'10"/ 177 cm tall.
The Warmer Weather Speedster and Race Pant
Nike Swift Run Pant ($120)
The Predict RA is brand new, light approximately 9.4oz/266 g well cushioned trainer incorporating, top to bottom, upper to outsole, a carefully considered biomechanical design which allows the foot to follow its natural movements and this for a variety of foot shapes, strike types and paces. We think its best use is as a moderate pace daily trainer.
The upper, midsole, and outsole are designed to follow those foot movements even incorporating flex grooves mirroring the outsole’s just under foot in the midsole. There are ten platforms of support corresponding to the bones in the foot, all decoupled by the grooves on both sides of the sole so the shoe can adapt to the runner's foot strike type and motion.
Heather Pieraldi of Salomon presents the design and construction of the Predict
Please Subscribe to Road Trail Run's YouTube Channel!
The ride is on the soft, flexible and easy side and is softer than any prior Salomon, yet with very adequate stability from the full coverage outsole. There is a distinct sense of a smooth transition and a particularly proprioceptive yet well cushioned but softer forefoot feel. You can really feel those individual pads and sections upfront working with the foot in motion. The fit is also a departure for Salomon, no trail shoe straight jacket here. The upper is very roomy toe to heel yet is adequately secure if not a “performance fit”. They are so comfortable that I have literally not had them off my feet since Salomon sent them.
The low rear heel counter and soft, lightly padded and slightly stretchy single piece molded rear area and plentiful room make them among the most comfortable of any shoes I have ever worn running or otherwise. Not to worry while this shoe can join you 24/7. I think its subtle classy looks “dress up” well although they are first and foremost a serious running shoe.
The Predict RA was designed from the ground up as a road shoe. Salomon’s earlier Sonic shoes were really adapted trail shoes and even the more road focused 2017-2018 Running Avenue Sonic RA models, while incorporating road focused features and some of the biomechanical principles seen here were firmer and very supportive, reminding of more “traditional” run shoes. They were a jumping off point on the way to Predict RA.
Women's Color Way
The Predict RA does draw on Salomon’s expertise in materials and manufacturing (Contagrip outsole rubbers, Energy Cell+ midsole foams, and Sensi Fit type upper design) but was designed from the ground up as a road running shoe. The team includes Simon Bartold, a world renowned sports podiatrist long involved in road running shoe design, Heather Pieraldi Salomon Director of Road Running with long experience in upper design and manufacturing, Brent James, Product Manager Road Running, and Marlene Giandolini Salomon’s Biomechanics Product Manager Road Running and lab director.
During two initial seasons where some of Simon’s bio mechanical design concepts were tested in Running Avenue, in particular decoupling of the geometry to ease transitions and toe offs via outsole design, and the introduction of Vibe Opal tibial vibration reduction inserts which came from Marlene’s work, development proceeded towards the Predict, a completely clean slate to bring to life the most recent research and Simon and Salomon’s decades of bio mechanical and shoe design knowhow into a shoe that can adapt to the runner. The concept according to Salomon is to try to reduce stress on the hips and knees by recognizing and designing to anatomy, foot function, and gait biomechanics, breaking away from traditional design and the trap of focusing on “cushion and control”.
Simon Bartold and Marlene Giandolini present the science behind the Predict
Please Subscribe to Road Trail Run's YouTube Channel!
Five rounds of testing in Salomon's internal lab to measure the effects of the shoe on joint load were conducted. The testing showed an average reduction of frontal plane knee torque of 12% in the 24 subjects, such torque can be a cause of knee pain and injuries, and a reduction of 4% in sub talar knee joint eversion, so less pronation when compared to non Salomon neutral shoes measured in the testing (see Salomon Soorts Science video here). And this despite the Predict being a quite flexible more neutral oriented shoe. For our part we tested the Predict on the road and came away very satisfied, Read on for the details.
Disclosure: I ran with Mike and Dave, the co-founders of Janji, at Wash U., but I purchased this kit with my own money. I hadn’t planned on a review, but I’ve gotten several compliments on the singlet-short combo already, and decided to write it up and spread the word.
The universal faces of running.
Introduction
Janji is a running apparel company based in Boston, Massachusetts. While they make the usual gauntlet of running gear – shorts, shirts, jackets, hats, etc. – they do so with a twist: 5% of the sale of each piece goes to help fund clean water projects in various countries. Many of their products or designs are country-specific, such that the design is taken from or inspired by the country, and the proceeds in turn go back to an effort in that specific nation. The fit and finish of each product is top-notch (no different from your average Nike or LuLu Lemon apparel), but the designs tend to be more inspired – and more fun.
New Balance Rubix v1
10.7 oz M / 8.9 oz W
8 mm drop
(Stats per Running Warehouse here)
$165. Available from Road Runner Sports now here
New Balance joins the post less support category with the new Rubix. I was at my local running store buying gels for a half the next day and so was one of New Balance's run category sales directors. We chatted and of course I noticed his shoes, the new Rubix support shoe, a shoe I had never heard of before.
New Balance Rubix Lateral Side
The Rubix instead of firm posts to "control" pronation opts for Guidance Ramps with differing angles informed by pressure plate data. In the photo above of the lateral side the gray foam is softer than the white foam.
New Balance Rubix Medial Side
In the photo above the medial side has firmer white Ground Contact foam to provides more support but pressing the foam it did not feel incredibly firm as posted EVA often is, making me think that this neutral runner who sometimes likes non posted support shoes may dig the Rubix. Note also the deep grooves in the midsole sidewalls to aid in transition and keep the shoe flexible. I was very impressed how flexible this "stability" shoe was. No clunky stiff rigid midsole here and at 10.7 oz no real penalty over a premium neutral shoe such as the New Balance 1080 v8 at 10.6 oz. In fact the Rubix looks way more fun to run than the sometimes clunky stiff 1080!
The outsole is mostly Ground Contact foam as in the fun to run new and popular Fresh Foam Beacon (RTR review). While difficult to see there is firmer rubber at the heel and toe but other wise you run on the midsole. Beacon's Ground Contact midsole/outsole has proved surprisingly durable. I note the deep grooves and extensive decoupling making me think this will be one smooth transitioning shoe and as New Balance puts it a stable, responsive and light feeling shoe. What a contrast with the firm, extensive, largely un segmented outsoles of Fresh Foam shoes such as the 1080. More good news!
The upper is a double Jacquard mesh designed by New Balance with different strengths and structures to support with a mid foot TPU overlays to support the foot.
The Rubix is intended as a performance ride which is not clunky and with no apologies for needing some support. It is a premium alternative to the 1260.
More to follow when RoadTrailRun tests the Rubix.
See Running Warehouse's First Impressions Review and New Balance video here
(The Rubix will be available at Running Warehouse late November.)
Rubis is available now at Road Runner Sports here and below as well as from New Balance's Amazon store.
Sales through these stores help support Road Trail Run's work.
Thanks for considering purchases from our partners!
Article by Sam Winebaum, Dom Layfield, & Dave Ames
UA Horizon BPF ($130)
The UA Horizon BPF is a relatively lightweight (approx, 10.1 oz/286 g) trail runner with a molded monocoque supportive upper, and a relatively firm, responsive but forgiving and protective 7mm drop ride which has very good stability over uneven terrain. They are shod with what proved to be a very versatile all terrain Michelin rubber outsole. The BPF in the product name stands for "Bullet Proof Feather" we think a product code name or theme turned into part of the model name. So are they are Bullet Proof Feather. We tested in Southern California and Vermont to find out.
Sam: Racers from world marathon record holder Eliud Kipochege to my fellow reviewer Cheyne Inman with a recent 1:07:08 half in his pair to slow old me a 1:40:26 in mine have been literally captivated by the Nike Vaporfly 4%, by the chase to try to find this rare shoe and the results which have been for the vast majority faster than expected at all distances and with less leg fatigue.
Most and we do to agree that the combination of very light weight for cushion, copious amounts of responsive soft Zoom X foam and an integrated full carbon plate for stability and propulsion with the resulting trademark "fresher legs to the finish" are the key factors in the racing and even training success of this shoe for so many.
I have been delighted by every one of my performances in them- multiple halves and 10K, a 5K, and a marathon), My pair for all but 2 races (Obsidian) has been from the very original July 2017 baby blue color release with now 130 miles of hard racing (review here) and no wear in sight. Subsequent releases had minor tweaks.
For example, I found the Obisdian somewhat firmer than the original and its mid foot upper down low had less volume and was more secure, a good thing as my original require a thicker Stance Fusion merino sock to take up volume.
Launching this September the Vaporfly 4% Flyknit gets an all new stretch knit upper substituting for the engineered mesh of the original.
This upper is very similar to the new Zoom Fly Flyknit's shown below, and which we will also discuss here, but essentially the Zoom Fly substitutes heavier and less expensive React foam for the Vaporfly's Zoom X foam and also has smaller full carbon plate.. along with a lower price of $160.
The changes to the Vaporfly 4% are clearly focused on better locking down the foot toe to heel, less volume but now stretch volume The result is essentially putting a race shoe upper on the Vaporfly's largely unchanged undercarriage.
I say largely unchanged as the new Vaporfly when run side by side one on each foot with my 130 mile pair is also very slightly firmer from what I can tell and notably more stable at the heel, an issue with the original for me and many on uneven pavement and steep downhills as the original could some be down right scary in those conditions. This new found stability and heel hold is due to the inclusion of a considerably more substantial heel counter in the new Vaporfly
What is going on with these changes? Well I suspect that just below the top few Nike elites who got the custom tuned Elite version that while loving the original "standard" consumer version ride other elites wanted a more dialed in race upper. We saw such prototypes over the last year. Further, so there would be no question in terms of IAAF and other regulations, I believe Nike thought it was important that the public could buy essentially the same shoe as potential record holders and that previous supply issues needed to be "reasonably" taken care of. And it appears this release had significantly more pairs available. As far as the ride of the new Vaporfly, my initial sense, and in keeping with the elite focus, is that it is somewhat firmer than the original with a touch less bounce but a more "taut" feeling springier effect which could be related to a now more snug upper with its increased support that better keeps the foot on the platform to fully take advantage of the famous carbon plate or other unseen and unannounced changes to the plate itself.
Stats
Weight all US M 8.5
Vaporfly 4% Flyknit: 6.42 oz /182 g
Vaporfly 4% Original Blue: 6.56 oz /186 g US
Zoom Fly Flyknit: 8.325 oz/236g
10 mm drop
$250
Fit and Upper
Sam: The new Flyknit Vaporfly fits me true to size but with caveats. The front stretch knit over the big toe area is quite dense and low on try on even as length is correct. After my initial 6 or so miles it has clearly stretched some in that area. Otherwise the fit is as one expect in a top level racing shoe, secure and snug and not at all like the fit of the original. Here I need to wear thin socks while in the original I wore thick Stance Fusion merino to get an adequate fit. I have heard many have sized up a half size in the Flyknit. I would too for sure if I wore thick socks but so far with a half race to come the fit is...fitting of a race shoe. Update: for my recent half I wore thin Compressport race socks and the fit was perfect, plenty of toe box volume now that the mesh has stretched a bit. Would without question wear this combination for a marathon. This said I may still use the original for marathons on flat courses as I did when I got my Boston Qualifier this spring, but for under marathon distances or hills the stability of the new upper and real heel counter is where I will lean.
Cheyne: I would agree with Sam on the upper fit, I went with my normal size and did not size up and the fit was perfect. I did also notice that the area over my big toe felt a little shallow, but it has stretched some after about 40 miles and I do not notice any rubbing from it. I have raced in them for a 10k and a half marathon and have not gotten any blisters.
The original had a most unique fit for a race shoe. Its non stretch engineered mesh provided a commodious very high volume toe box, a roomy mid foot and no heel counter. Note the amount of medial upper collapse on my well worn original Vaporfly. Less noticed on the run than visible but surely a factor in comparison to the taut directed upper and feel on the new version.
Some with narrow feet sized down with the original Vaporfly. There was no give to the upper to go with the room. I was true to size in the original and adapted with thicker socks. Zero blisters or any issues during my flat marathon in them or any other race. On steeper downhills and uneven pavement the fit was let's just say at times shaky.. The later Obsidian version clearly snugged things up at the mid foot and was an improved upper.
The Flyknit upper, in sharp contrast to the original's is a stretch knit with no overlays or reinforcements and also thankfully no FlyWire either which the original Zoom Fly had and potentially the original Vaporfly could have used.
All the support comes from the varying densities of the knitting of the upper and it is one heck of an upper.
It has a snug and comfortable fit but its denser mesh over the toes is felt whereas in the original there nothing felt over the toes, no pressure was felt just well held if spacious height and width.
This is clearly a more race performance fit upper and for me more suitable for sub marathon distances with the jury out on marathon use for me and their potential foot swelling but this it is important the upper does have some stretch.
The Zoom Fly Flyknit has a nearly identical upper with somewhat more height over the toes.
LEFT: Vaporfly 4% Flyknit RIGHT: Zoom Fly Flyknit
The Zoom Fly knit itself appears to be almost if not identical to the Vaporfly's in its density and stretch at the toe box with the Vaporfly seeming slightly less stretchy and slightly thinner at midfoot.
LEFT: Zoom Fly Flyknit RIGHT: Vaporfly 4% Flyknit
Zoom Fly Flyknit
The Zoom Fly has a nearly if not identical ankle and achilles padding but a slightly wider foot opening and greater mid foot volume.
BOTTOM: Vaporfly 4% Flyknit TOP: Zoom Fly Flyknit
The use of Flyknit distinctly improves the mid foot hold vs. the original where there was a fairly distinct sense of medial collapse, actually I kind of liked the feeling there but it was overly roomy.
Another key improvement is a beefing up of the heel counter and "narrowing" of the ankle collar through stretch knit vs the original's non stretch and overlays to better stabilize the heel area .
The original (right) had essentially no heel counter beyond a touch of vertical stiffening, the red strip.
The Flyknit while not having a firm traditional heel counter now has plenty of heel support from the some stiffening down low wrapping the heel and the denser thicker padding around the sides of the achilles collar. Up higher at the achilles in front of the pull on strap there is no padding. I definitely will not be wearing no show socks here.
The result is a far more stable heel than the original with so far fewer issues on steep downhills or off camber pavement.
Bottom line for me is that I prefer the now secure heel and mid foot hold of the Vaporfly Flyknit but miss the spacious toe box of the original. A good compromise given we have a single piece all knit upper here was to adopt a bit more of the height of the Zoom Fly in the front of the toe box to the Vaporfly
Midsole
The special magic of the Vaporfly 4% is the midsole combining very light energetic Zoom X PEBA foam and a full length carbon plate. The carbon plate sits about a half inch down below the foot at the heel (at the crease above the lettering below), plunges at mid foot, and then is located just above the outsole up front. The plate location at the heel above the Zoom X insures a well cushioned but short time lingering at the heel. The front plate location insures cushion up front for the toes but then an explosive take off when downward forces meet the plate. Essentially the plate up front acts much in the same way as a spike plate in a track shoe, a stable firm platform for push off.
Cheyne: Although I did not experience a magical burst of energy from wearing these shoes, I believe they drastically cut down on fatigue and post race soreness. My calves particularly do not feel the typical wear and tear that I experience after racing in a low profile racing flat, and this protection is what I believe aids in race performance over longer distances. I was even able to cool down in the shoes after my race and they felt soft and comfortable jogging at slower speeds.
Outsole
There are no visible changes to the outsole or underside geometry. Most will scuff the white painted Zoom X but this wear is entirely cosmetic. My original (left) with over 130 miles of mostly hard racing have quite frankly minimal wear.
Cheyne: The outsole does not stand out as an outsole that would offer much grip, but I have worn them on some slick concrete paths and had no issues.
The Zoom Fly has very similar outsole and exposed midsole geometry but with some differences. The front pentagonal pads are slightly concave while the Vaporfly's are flat.
They both share slightly concave rubber heel pads. The Zoom Fly has deeper center midsole cavities. I find the Zoom Fly slightly softer overall particularly at the heel from from these deeper cavities and I assume the React foam and the narrower carbon plate
Ride
The Vaporfly 4% Flyknit's ride is not significantly changed as all materials and geometries, including the outsole "appear"unchanged. This said the Flyknit's midsole and ride feels somewhat more "taut" as if the carbon plate is springier with a touch less of the soft bounce of the original. Overall one can say the new Vaporfly is more responsive, more in keeping with an elite performance profile than the original which was ever so slightly more friendly and cushy. The later Obsidian recent release had a similar midsole feel but I felt also has less spring than the Flyknit. While I have no confirmation of changes to the carbon plate some report a snapping sound when running or maybe more suction from the outsole. I definitely was hearing something different when compared to the original. The Flyknit for sure feels more directed in the line of travel with a more distinct and firmer spring. Could this more directed and springier feel be in part due the effect of a more secure upper and heel counter that causes this sensation by better mating the foot to the platform? Hard to say but definitely possible.
Cheyne: Very smooth ride because of the amount of cushioning this shoe offers. I think it will work well for midfoot, forefoot, or heel strikers.
Race Results and Update
Cheyne just won the Ventura Half Marathon in his Vaporfly Flyknit in a near PR time (within 11 seconds) ) of 1:07:08!
Sam: I ran the Baystate Half at Lowell, MA in the Vaporfly Flyknit losing first in my Age Group in the final mile and confirmed my initial impressions that the Flyknit is slightly firmer and less bouncy than the original. It is more responsive but a little harder to keep in the forward lean groove and bounce away ride of the original. It is clearly more stable on rough pavement and downhills at the heel and midfoot but still a bit tippy on off camber pavement.
Conclusions and Recommendations
Sam:
The new Vaporfly 4% Flyknit gains a performance fit stretch knit upper which eliminates the heel and mid foot play of the original's non stretch engineered mesh but which has less toe box volume and height as a result. It is important to note the upper does stretch and initial try on may not be what they feel like with a few miles on them as I found out.
Some may find the need to size up but so far I am OK at the same size as my original Vaporfly using thin instead of thick socks. While "comfort" may have suffered a bit, making the original a potentially more comfortable marathon shoe for mere mortals such as me, the Vaporfly is now more directed given the foot is really locked to the upper. Heel stability is notably improved given the inclusion of a heel counter so steep downhills and uneven off camber pavement is no longer as "scary". Midfoot medial collapse is reduced via the snugger lower volume knit construction.
I am also sensing, and the new upper can be a factor as the foot is better locked down, that the ride is springier, more taut and dynamic and not quite as soft and bouncy. There is no question, and results from a world record to countless smiling PR, that the Vaporfly 4%'s combination of very light weight for the cushion provided and dynamic propulsion from the carbon plate continues to provide a very special running experience of speed and very fresh consistent legs to the finish and in recovery days after. The best race shoe I have ever run bar none.
Sam’s Score: 9.85/10
I would score version 1 and version 2 about the same but for different reasons. With version 2 here the loose upper issues for which I would deduct are well fixed but with version 2 we get a slightly firmer less bouncy ride which is harder to maintain in the special Vaporfly groove. For both I would also deduct a bit for the very high price of admissions.
Cheyne:
These shoes are currently my most prized possession. I have raced in them twice and they definitely live up to the hype. I do not feel that they make you faster from a midsole rebound standpoint, but I do think they help with lower leg fatigue which translates to better form and energy return at the end of a marathon. I believe that this energy will lose some of its pop the more you use them, so I will be limiting their use. If the Vaporfly 4% were less expensive and more easily available I would absolutely use them for workouts and races, but because of this I will be saving them to wear at my goal race in December at the California International Marathon. I did not size up in this shoe and they fit me perfectly for a racing shoe, very snug in all the areas I need support.
Cheyne’s Score: 9.9/10
I absolutely love this shoe and I would give it a perfect score, but I would like it to be about an ounce lighter for a more race-like upper feel.
Watch Cheyne Inman's YouTube review of the Vaporfly 4% Flyknit!
Sam: Topped with for all intents and purposes with an identical upper with slightly more volume, the Zoom Fly substitutes React foam for Zoom X and uses a narrower carbon plate. It is nearly 2 oz heavier and weighs $90 less. The ride is slightly softer at the heel but not quite as dynamic and a bit bottom heavy as the 2 ounce difference in weight is felt and React is just not the silky smooth Zoom X in feel. This said, at just a shade over 8.5 oz in a US men's 9, it is clearly a trainer compliment to the Vaporfly and a fantastic if a bit tuned down up tempo trainer and racer. I call it a Zoom Fly "2.5%" as I did in my review linked above.
Cheyne: The Zoom Fly is the only shoe on the market that compares to the feel and energy conservation that the Vaporfly offers. I like to use the Zoom Fly for workouts(it costs less), but I like the bouncier feel and lighter weight for racing that the Vaporfly offers.
Skechers Razor 3 Hyper (RTR review)
Cheyne: The comparison I see in these two shoes is that they both have enough midsole to leave your legs feeling more recovered after a hard effort, but they are light enough to run fast in. The difference I see in the shoes is obviously the price, but also that the Vaporfly 4% is firmer and more responsive, but the Razor 3 is lighter. If the Razor 3 had the the Carbon Fiber plate that the VP4% has, I would go with the Razor 3 as my race day shoe.
Reviewer Bios
Cheyne Inman competed in college at the University of San Francisco where he was the first athlete in school history to win the West Coast Conference Championships. After college he was a head coach in cross-country and track at the high school and collegiate level before moving on to managing athlete sponsorships at Skechers Performance. Currently he is coaching the 2017 California State Championship team at West Torrance High School and pursuing a career in real estate. He enjoys running in neutral running shoes for the trails, track, and road and typically runs over 100 miles a week. He has pr’s of: 5k- 14:36 10k- 30:23 half marathon- 1:06:57 marathon- 2:25:38
Sam Winebaum is the Editor and Founder of RoadTrailRun. He has been running and shoe geeking for 45 years. As he turned 60 in 2017 he was thrilled to clock a 1:35.24 half and as he turned 61 a 3:40 marathon to qualify one more time for Boston. Sam runs his roads and trails in coastal New Hampshire and Park City, Utah.
The product reviewed in this article was a personal purchase. The opinions herein are entirely the authors'.
Comments Questions Welcome Below!
Visit our 2019 Previews Page herefor 2019 run shoe, apparel, and gear previews.
Watch our YouTube Channel herefor 2019 Run Shoe Previews and Wearable Tech Reviews
Visit our Index Pageherefor over 150 in depth 2017 & 2018 shoe and gear reviews